Maxell Lto-3 Technology Is Reliable
No doubt, the security requirements for the future, seize and maintain large amounts of important information, applications are receiving data, archiving, disaster recovery and data backup. Therefore, the objectives of the semiconductor, magnetic storage media and optical manufacturers for more data to lower costs and faster. Apparatus of the tape is the superior technology, the safe storage of data for a long time. If these different storage technologies, the conclusion is that the magnetic stripe data cost per GB is the lowest.
LTO tape technology has reached more storage per cartridge, and still is the introduction of new generations. The storage capacity of LTO-1 tape has terabytes. Tape LTO-4 can be compressed 1.6 terabytes of data. This is really the massive amount of data of 1 TB of three million pages of text. There are many challenges, with high storage capacity have to manage. These challenges include the reduction of metal particles in the size, thickness, reduced bandwidth, low cost per GB, increased density of tracks and the density of bits.
Maxell has developed these objectives and the best solution to address these challenges through the introduction of the Neo Super Maximum Reliability Tape (Neo-SMART) technology in LTO3 (183,950) Tape Format. Neo-SMART is the combination of 7 key technologies that contribute to the reliability and performance of Maxell LTO Ultrium 3. SMART Technologies in Neo are advanced dispersion, fine metal particles, ultra-thin coating, high performance tape advanced calendar functions, stable writing Servo Track-write Schlitzung and extremely accurate. Maxell a stable and lasting dual binding mechanism in the LTO-3 (183950) by the band of neo-induction of the SMART technology.
Since the density of metal particles increases, the metal particles tend to keep everything else. Thus, Volume rough surface that the reduction of the signal. Maxell find the solution to this problem and the two complementary mechanisms that are ultra smooth dispersion of metal particles. This mechanism also advanced dispersion of metal particles and then each particle is followed by a layer of specific binding. The metal particles are observed by a chemical process. SMART Technologies in Neo are advanced dispersion, fine metal particles, ultra-thin coating, high performance tape advanced calendar functions, stable writing Servo Track-write Schlitzung and extremely accurate.
It is necessary that the band diameter should be very difficult and long-lived, as the amount of animals in modern tape storage products. Maxell a stable and lasting dual binding mechanism in the LTO-3 (183950) by the band of neo-induction of the SMART technology. Neo SMART includes binders some of them are in first place, while the others are secondary. Neo SMART drive using a chemical bond, three-dimensional (3-D) structure. This structure increases the magnetic layer of the heat resistance level of reliability and accuracy in severe conditions. As the technology by the neo-SMART in Maxell LTO3 Ultrium cartridge helps to clarify and better results, even under high pressure and flow. Dispersion range and chemical bond, because the neo-SMART technology LTO Tape Cartridge the most powerful, robust and hard to increase the volume of life.
For command line Maxell LTO-3, HP LTO3, TDK LTO3 Fuji LTO3, Sony LTO3, Dell LTO3, LTO Ultrium LTO and cleaning, you can visit the “tape4backup.com”